SIMULATION - Guidelines - This is a lab item in which tasks will be performed on virtual devices • Refer to the Tas…

SIMULATION - Guidelines - This is a lab item in which tasks will be performed on virtual devices • Refer to the Tasks tab to view the tasks for this lab item. • Refer to the Topology tab to access the device console(s) and perform the tasks. • Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window. • All necessary pre-configurations have been applied. • Do not remove any existing configurations from the devices, only those necessary to make the appropriate changes required to fulfill the listed tasks. • Do not change the enable password or hostname for any device. • Save your configurations to NVRAM before moving to the next item. • Click Next at the bottom of the screen to submit this lab and move to the next question. • When Next is clicked, the lab closes and cannot be reopened. Topology - //IMG// Tasks - Task 1 - • Configure a host route on R5 for the destination of 10.200.220.6. • Configure a static default route on R1 preferring the path through R3 towards R6. • From R5, use traceroute and ping to verify the path towards and reachability of R6. Task 2 - • Configure a floating static default route on R1, preferring the path through R2 towards R6 if the link to R3 should fail. • Configure the administrative distance for 225. • Configure a static route on R2 to forward the return traffic towards 10.100.110.0/25. • After shutting interface e0/1 on R1, use traceroute and ping from R5 to verify path towards and reachability of R6.