# 200-301 — Question 1715

**Type:** case_study
**Topics:** network_configuration, routing, simulation_lab

## Question

SIMULATION
-


Guidelines
-

This is a lab item in which tasks will be performed on virtual devices

• Refer to the Tasks tab to view the tasks for this lab item.
• Refer to the Topology tab to access the device console(s) and perform the tasks.
• Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window.
• All necessary pre-configurations have been applied.
• Do not remove any existing configurations from the devices, only those necessary to make the appropriate changes required to fulfill the listed tasks.
• Do not change the enable password or hostname for any device.
• Save your configurations to NVRAM before moving to the next item.
• Click Next at the bottom of the screen to submit this lab and move to the next question.
• When Next is clicked, the lab closes and cannot be reopened.


Topology
-

//IMG//



Tasks
-


Task 1
-

• Configure a host route on R5 for the destination of 10.200.220.6.
• Configure a static default route on R1 preferring the path through R3 towards R6.
• From R5, use traceroute and ping to verify the path towards and reachability of R6.


Task 2
-

• Configure a floating static default route on R1, preferring the path through R2 towards R6 if the link to R3 should fail.
• Configure the administrative distance for 225.
• Configure a static route on R2 to forward the return traffic towards 10.100.110.0/25.
• After shutting interface e0/1 on R1, use traceroute and ping from R5 to verify path towards and reachability of R6.

## Correct Answer

_See scenario._

**Reference:** examtopics_top_comment

---
Source: https://hiexam.net/q/cisco/200-301/1715  
Practice (tracked): https://hiexam.net/study/200-301/practice