SIMULATION - Guidelines - This is a lab item in which tasks will be performed on virtual devices • Refer to the Tas…

SIMULATION - Guidelines - This is a lab item in which tasks will be performed on virtual devices • Refer to the Tasks tab to view the tasks for this lab item. • Refer to the Topology tab to access the device console(s) and perform the tasks. • Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window. • All necessary preconfigurations have been applied. • Do not change the enable password or hostname for any device. • Save your configurations to NVRAM before moving to the next item. • Click Next at the bottom of the screen to submit this lab and move to the next question. • When Next is clicked the lab closes and cannot be reopened. Topology - //IMG// Tasks - All physical cabling is in place and verified. Connectivity between all four switches must be established and operational. All ports are pre-configured as 802.1q trunks. 1. Configure both SW-1 and SW-2 ports e0/1 and e0/2 to permit only the allowed VLANs 2. Configure both SW-3 and SW-4 ports e0/2 to permit only the allowed VLANs 3. Configure both SW-1 and SW-2 e0/1 ports to send and receive untagged traffic over VLAN 99 4. Configure both SW-3 and SW-4 ports e0/0 and e0/1 for link aggregation using the industry standard protocol. All ports must immediately negotiate the link aggregation 5. Permit only the allowed VLANs on the new link