# 200-301 — Question 1792

**Type:** case_study
**Topics:** network_configuration, vlan, link_aggregation

## Question

SIMULATION -


Guidelines -

This is a lab item in which tasks will be performed on virtual devices

• Refer to the Tasks tab to view the tasks for this lab item.
• Refer to the Topology tab to access the device console(s) and perform the tasks.
• Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window.
• All necessary preconfigurations have been applied.
• Do not change the enable password or hostname for any device.
• Save your configurations to NVRAM before moving to the next item.
• Click Next at the bottom of the screen to submit this lab and move to the next question.
• When Next is clicked the lab closes and cannot be reopened.


Topology -

//IMG//



Tasks -

All physical cabling is in place and verified. Connectivity between all four switches must be established and operational. All ports are pre-configured as 802.1q trunks.

1. Configure both SW-1 and SW-2 ports e0/1 and e0/2 to permit only the allowed VLANs
2. Configure both SW-3 and SW-4 ports e0/2 to permit only the allowed VLANs
3. Configure both SW-1 and SW-2 e0/1 ports to send and receive untagged traffic over VLAN 99
4. Configure both SW-3 and SW-4 ports e0/0 and e0/1 for link aggregation using the industry standard protocol. All ports must immediately negotiate the link aggregation
5. Permit only the allowed VLANs on the new link

## Correct Answer

_See scenario._

**Reference:** examtopics_top_comment

---
Source: https://hiexam.net/q/cisco/200-301/1792  
Practice (tracked): https://hiexam.net/study/200-301/practice