SIMULATION - Guidelines - This is a lab item in which tasks will be performed on virtual devices. • Refer to the Ta…

SIMULATION - Guidelines - This is a lab item in which tasks will be performed on virtual devices. • Refer to the Tasks tab to view the tasks for this lab item. • Refer to the Topology tab to access the device console(s) and perform the tasks. • Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window. • All necessary preconfigurations have been applied. • Do not change the enable password or hostname for any device. • Save your configurations to NVRAM before moving to the next item. • Click Next at the bottom of the screen to submit this lab and move to the next question. • When Next is clicked, the lab doses and cannot be reopened. Topology - //IMG// Tasks - VLANS 35 and 45 have been configured in all three switches. All physical connectivity has been installed and verified All inter-switch links must be operational. 1. Configure SW-1 and SW-2 switch ports e0/0 and e0/1 for 802.1q trunking allowing all VLANS 2. Configure the inter-switch links on SW-1 e0/2, SW-2 e0/2, and SW-3 e0/0 and e0/1 to use native VLAN 35 3. Configure SW-1 and SW-2 switch ports e0/0 and e0/1 for link aggregation SW-1 should immediately negotiate LACP and SW-2 must only respond to LACP requests //IMG//