# 200-301 — Question 1680

**Type:** case_study
**Topics:** vlans, trunking, link_aggregation, network_configuration

## Question

SIMULATION
-


Guidelines
-

This is a lab item in which tasks will be performed on virtual devices.

• Refer to the Tasks tab to view the tasks for this lab item.
• Refer to the Topology tab to access the device console(s) and perform the tasks.
• Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window.
• All necessary preconfigurations have been applied.
• Do not change the enable password or hostname for any device.
• Save your configurations to NVRAM before moving to the next item.
• Click Next at the bottom of the screen to submit this lab and move to the next question.
• When Next is clicked, the lab doses and cannot be reopened.


Topology
-

//IMG//



Tasks
-

VLANS 35 and 45 have been configured in all three switches. All physical connectivity has been installed and verified All inter-switch links must be operational.

1. Configure SW-1 and SW-2 switch ports e0/0 and e0/1 for 802.1q trunking allowing all VLANS
2. Configure the inter-switch links on SW-1 e0/2, SW-2 e0/2, and SW-3 e0/0 and e0/1 to use native VLAN 35
3. Configure SW-1 and SW-2 switch ports e0/0 and e0/1 for link aggregation SW-1 should immediately negotiate LACP and SW-2 must only respond to LACP requests

//IMG//

## Correct Answer

_See scenario._

**Reference:** examtopics_top_comment

---
Source: https://hiexam.net/q/cisco/200-301/1680  
Practice (tracked): https://hiexam.net/study/200-301/practice