Instructions -
✑ Enter IOS commands on the device to verify network operation and answer the multiple-choice questions.
✑ THIS TASK DOES NOT REQUIRE DEVICE CONFIGURATION.
✑ Click on SW1, SW2, New_Switch or SW4 to gain access to the consoles of these devices. No console or enable passwords are required.
✑ To access the multiple-choice questions, click on the numbered boxes on the left of the top panel.
✑ There are four multiple-choice questions with this task. Be sure to answer all four questions before selecting the Next button
Scenario -
You have been asked to install and configure a new switch in a customer network. Use the console access to the existing and new switches to configure and verify correct device configuration.
Topology -
//IMG//
//IMG//
//IMG//
//IMG//
//IMG//
You are adding new VLANs. VLAN500 and VLAN600 to the topology in such way that you need to configure SW1 as primary root for VLAN 500 and secondary for
VLAN 600 and SW2 as primary root for VLAN 600 and secondary for VLAN 500. Which configuration step is valid?
- A.Configure VLAN 500 & VLAN 600 on both SW1 & SW2
- B.Configure VLAN 500 and VLAN 600 on SW1 only
- C.Configure VLAN 500 and VLAN 600 on SW2 only
- D.Configure VLAN 500 and VLAN 600 on SW1 ,SW2 and SW4
- E.On SW2; configure vtp mode as off and configure VLAN 500 and VLAN 600; configure back to vtp server mode.