SIMULATION - Guidelines - This is a lab item in which tasks will be performed on virtual devices • Refer to the Tas…

SIMULATION - Guidelines - This is a lab item in which tasks will be performed on virtual devices • Refer to the Tasks tab to view the tasks for this lab item. • Refer to the Topology tab to access the device console(s) and perform the tasks. • Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window. • All necessary pre-configurations have been applied. • Do not remove any existing configurations from the devices, only those necessary to make the appropriate changes required to fulfill the listed tasks. • Do not change the enable password or hostname for any device. • Save your configurations to NVRAM before moving to the next item. • Click Next at the bottom of the screen to submit this lab and move to the next question. • When Next is clicked, the lab closes and cannot be reopened. Topology - //IMG// Tasks - Task 1 - Configure trunks between Sw1 and Sw2 on ports E0/0 and E0/1 using the IEEE standard frame tagging method. • Add VLAN 99 as untagged on the trunk ports. • Only extend VLAN 110 and the untagged VLAN across the trunk. • Verify that PC1 is capable of pinging PC2. Task 2 - On Sw1 and Sw2, use IEEE 802.3ad link aggregation. • Combine E0/0 and E0/1 into a single logical link while leaving the trunk configurations intact. • Assign number 20 to the link. • Both links must negotiate aggregation.