SIMULATION - Guidelines - This is a lab item in which tasks will be performed on virtual devices. • Refer to the Ta…

SIMULATION - Guidelines - This is a lab item in which tasks will be performed on virtual devices. • Refer to the Tasks tab to view the tasks for this lab item. • Refer to the Topology tab to access the device console(s) and perform the tasks. • Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window. • All necessary preconfigurations have been applied. • Do not change the enable password or hostname for any device. • Save your configurations to NVRAM before moving to the next item. • Click Next at the bottom of the screen to submit this lab and move to the next question. • When Next is clicked, the lab doses and cannot be reopened. Topology - //IMG// Tasks - Refer to the topology. All physical cabling is in place. Configure a local user account, a Named ACL (NACL) and security. 1. Configure a local account on Sw101 with telnet access only on virtual ports 0-4. Use the following information: o Username: netops o Password: ipsec4all o Algorithm: "Vigenere" o Privilege level: Exec mode 2. Configure and apply a single NACL on Sw103 using the following: o name: ENT_ACL o Restrict only PC1 on VLAN 10 from pinging PC2 o Allow only PC1 on VLAN 10 to telnet to R1 (172.16.30.2) o Prevent all other devices from telnetting from VLAN 10 o Allow all other network traffic from VLAN 10 3. Configure security on interface Ethernet 0/0 of Sw102: o Set the maximum number of secure MAC addresses to two o Ensure that the port discards the packet, counts the number of violations and sends a syslog message o Allow secure mac addresses to be learned dynamically