SIMULATION - Guidelines - This is a lab item in which tasks will be performed on virtual devices • Refer to the Tas…

SIMULATION - Guidelines - This is a lab item in which tasks will be performed on virtual devices • Refer to the Tasks tab to view the tasks for this lab item. • Refer to the Topology tab to access the device console(s) and perform the tasks. • Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window. • All necessary preconfigurations have been applied. • Do not change the enable password or hostname for any device. • Save your configurations to NVRAM before moving to the next item. • Click Next at the bottom of the screen to submit this lab and move to the next question. • When Next is clicked the lab closes and cannot be reopened. Topology - //IMG// Tasks - Refer to the topology. All physical cabling is in place. Configure a local user account, a Named ACL (NACL), and security. Task 1 - Configure a local account on Sw101 with telnet access only on virtual ports 0-4. Use the following information: • Username: support • Password: max2learn • Privilege level: Exec mode Task 2 - Configure and apply a single NACL on Sw101 using the following: • Name: ENT_ACL • Restrict only PC2 on VLAN 200 from pinging PC1 • Allow only PC2 on VLAN 200 to telnet to Sw101 • Prevent all other devices from telnetting from VLAN 200 • Allow all other network traffic from VLAN 200 Task 3 - Configure security on interface Ethernet 0/0 of Sw102: • Set the maximum number of secure MAC addresses to four. • Drop packets with unknown source addresses until the number of secure MAC addresses drops below the configured maximum value. No notification action is required. • Allow secure MAC addresses to be learned dynamically. //IMG// //IMG// //IMG// //IMG//