SIMULATION - Guidelines - This is a lab item in which tasks will be performed on virtual devices • Refer to the Tas…

SIMULATION - Guidelines - This is a lab item in which tasks will be performed on virtual devices • Refer to the Tasks tab to view the tasks for this lab item. • Refer to the Topology tab to access the device console(s) and perform the tasks. • Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window. • All necessary preconfigurations have been applied. • Do not change the enable password or hostname for any device. • Save your configurations to NVRAM before moving to the next item. • Click Next at the bottom of the screen to submit this lab and move to the next question. • When Next is clicked the lab closes and cannot be reopened. Topology - //IMG// Tasks - Configure IPv4 and IPv6 connectivity between two routers. For IPv4, use a /28 network from the 192.168.180.0/24 private range. For IPv6, use the first /64 subnet from the 2001:0db8:acca::/48 subnet. 1. Using Ethernet0/1 on routers R1 and R2, configure the next usable /28 from the 192.168.180.0/24 range. The network 192.168.180.0/28 is unavailable. 2. For the IPv4 /28 subnet, router R1 must be configured with the first usable host address. 3. For the IPv4 /28 subnet, router R2 must be configured with the last usable host address. 4. For the IPv6 /64 subnet, configure the routers with the IP addressing provided from the topology. 5. A ping must work between the routers on the IPv4 and IPv6 address ranges. //IMG// //IMG//