# 200-301 — Question 1707

**Type:** case_study
**Topics:** vlan_configuration, switching, neighbor_discovery, networking

## Question

SIMULATION
-

//IMG//


R1 has been pre-configured with all the necessary commands. All physical cabling is in place and verified. Connectivity to the end devices must be configured.

1. Configure SW-1 switch port 0/1 to carry traffic for the Cisco IP phone and PC
2. Configure SW-2 E0/1 to carry traffic for PC2
3. Configure VLAN 10 with the name “Engineering” on SW-1
4. Configure the link between SW-1 and SW-2 to use the vendor neutral neighbor discovery protocol
5. Configure the link on SW-1 to R1 so that it does not allow the Cisco neighbor discovery protocol to pass

## Correct Answer

_See scenario._

**Reference:** examtopics_top_comment

---
Source: https://hiexam.net/q/cisco/200-301/1707  
Practice (tracked): https://hiexam.net/study/200-301/practice